Burgmann-Compatible Mechanical Seals

Replacement seals built to Burgmann and EagleBurgmann designs: elastomer bellows seals, spring seals and double seals, made in-house at manufacturer-direct pricing.

Request a quote →Talk to an engineer

We build most Burgmann seals, not only the types named on this page. Send the seal part number, a drawing or the old seal.

At a glance

01Common requests: MG1 / MG12 / MG13
02M7N / H7N / HJ92N in our catalog
03SiC / Carbon / TC
04Custom & obsolete

We are the manufacturer, not a reseller — we build in-house and supply at quantities that work for a distributor, an OEM or a maintenance department.

Drop-in fitmatched to Burgmann envelopes

OEM dimensionsfaces, springs and hardware to spec

Cost savingsmanufacturer-direct vs OEM pricing

Range

What we supply

Equivalents across the Burgmann range, OEM-compatible or fully custom.

MG elastomer bellows seals

MG1, MG12, MG13, MG1S20 and MG912 equivalents. Dimensions and limits for the MG1 family are on the MG1 / MG12 / MG13 page.

Spring and double seals

M3, M7N, H7N, H12N, HJ92N and M74D equivalents, listed with their limits in our catalog.

Custom & obsolete

Discontinued or non-standard Burgmann seals machined from a drawing or a sample of the old seal.

From our catalog

Burgmann equivalents in our catalog

Common Burgmann designs and the operating limits of our equivalents. Seals not listed here are built from the part number, a drawing or the old seal.

Burgmann design	Our model	Pressure	Speed	Temperature
MG1 / MG12 / MG13	MG model page	Vacuum to 1.2 MPa	≤ 10 m/s	-20 to 120 °C
MG912	WM MG912	≤ 1.0 MPa	≤ 10 m/s	-20 to 120 °C
M3	WM M3	≤ 1.0 MPa	≤ 10 m/s	-20 to 180 °C
H12N	WM H12N	≤ 1.0 MPa	≤ 10 m/s	-20 to 180 °C
M7N / M74N	WM M7N	≤ 1.6 MPa	≤ 20 m/s	-30 to 200 °C
H7N / H75N	WM H7N	≤ 2.5 MPa	≤ 20 m/s	-20 to 200 °C
HJ92N	WM HJ92N	≤ 2.5 MPa	≤ 20 m/s	-20 to 180 °C
M74D	WM M74D	≤ 2.5 MPa	≤ 20 m/s	-20 to 200 °C

OEM-compatible equivalents built to the original envelope — not sold as genuine Burgmann or EagleBurgmann parts.

Download catalog PDF · 10 MB ↓

Drawings & dimensions

Drawings and dimension tables

The catalog models in the table above, with their section drawings. Dimensions in mm unless a table says inches. Inch sizes are named by the nominal shaft size in inches; d1 gives the same size in mm. Letters match the section drawing. Standard sizes shown; other sizes are built from a drawing or the old seal.

Catalog model

WM MG912 INCH

Pressure: ≤ 1.0 MPa
Speed: ≤ 10 m/s
Temperature: -20 to +120 °C

Stationary ring: Ceramic, SiC, tungsten carbide
Rotary ring: Carbon, SiC, tungsten carbide
Secondary seals: NBR, EPDM, Viton
Spring and pressed parts: Steel

Model	d1 (mm)	d3	d2	d7	l1	l11	l14	l15	l2
WMMG912-0.375"	9.5	18.8	15.88	22.23	44.0	30.15	25.0	20.63	7.95
WMMG912-0.500"	12.7	22.3	19.05	25.40	44.0	30.15	25.0	20.63	7.95
WMMG912-0.625"	15.8	26.5	23.80	31.75	44.0	33.33	25.0	22.23	10.31
WMMG912-0.750"	19.0	29.5	26.97	34.93	44.0	33.33	25.0	22.23	10.31
WMMG912-0.875"	22.2	33.0	30.15	38.10	44.0	34.93	25.0	23.80	10.31
WMMG912-1.000"	25.4	38.0	33.32	41.28	44.0	39.70	25.0	25.40	11.10
WMMG912-1.125"	28.5	41.5	36.50	44.45	60.0	41.27	33.0	27.00	11.10
WMMG912-1.250"	31.7	45.0	39.70	47.63	60.0	41.27	33.0	27.00	11.10
WMMG912-1.375"	34.9	48.0	42.85	50.80	60.0	42.85	33.0	28.57	11.10
WMMG912-1.500"	38.1	52.5	46.05	53.98	60.0	42.85	33.0	28.57	11.10
WMMG912-1.625"	41.2	57.0	50.80	60.33	60.0	50.80	33.0	34.93	12.70
WMMG912-1.750"	44.4	60.5	53.97	63.50	71.0	50.80	41.0	34.93	12.70
WMMG912-1.875"	47.6	64.0	57.15	66.68	71.0	53.98	41.0	38.10	12.70
WMMG912-2.000"	50.8	66.0	60.33	69.85	72.5	53.98	42.5	38.10	12.70
WMMG912-2.125"	53.9	71.0	60.33	76.20	71.0	60.33	41.0	42.85	14.27
WMMG912-2.250"	57.1	76.5	61.90	79.38	71.0	60.33	41.0	42.85	14.27
WMMG912-2.375"	60.3	78.5	65.10	82.55	71.0	63.50	41.0	46.06	14.27
WMMG912-2.500"	63.5	82.0	68.25	85.73	71.0	63.50	41.0	46.06	14.27
WMMG912-2.625"	66.6	84.0	71.42	85.73	70.0	69.85	49.0	49.19	15.88
WMMG912-2.750"	69.8	89.0	74.60	88.90	70.0	69.85	49.0	49.19	15.88
WMMG912-2.875"	73.0	92.5	77.77	95.25	73.0	73.02	52.0	52.37	15.88
WMMG912-3.000"	76.2	95.5	80.95	98.43	73.0	73.02	52.0	52.37	15.88
WMMG912-3.125"	79.3	101.6	84.12	101.60	79.0	79.37	56.0	55.55	19.84
WMMG912-3.250"	82.5	-	87.30	104.78	79.0	79.37	56.0	55.55	19.84
WMMG912-3.375"	85.7	-	90.47	107.95	79.0	79.37	56.0	55.55	19.84
WMMG912-3.500"	88.9	111.5	93.65	111.13	79.0	79.37	56.0	55.55	19.84
WMMG912-3.625"	92.0	-	96.82	114.30	83.0	82.55	59.0	58.72	19.84
WMMG912-3.750"	95.2	118.0	100.00	117.48	83.0	82.55	59.0	58.72	19.84
WMMG912-3.875"	98.4	-	103.17	120.65	86.0	85.72	62.0	61.90	19.84
WMMG912-4.000"	101.6	125.0	106.35	123.83	86.0	85.72	62.0	61.90	19.84

Catalog model

WM MG912 METRIC

Pressure: ≤ 1.0 MPa
Speed: ≤ 10 m/s
Temperature: -20 to +120 °C

Stationary ring: Ceramic, SiC, tungsten carbide
Rotary ring: Carbon, SiC, tungsten carbide
Secondary seals: NBR, EPDM, Viton
Spring and pressed parts: Steel

Model	d1 (mm)	d3	d2	d7	l1	l12	l13	l14	l2
WMMG912-10	10	19.6	17	21	44.0	33.4	25.9	25.0	6.6
WMMG912-12	12	21.6	19	23	44.0	33.4	25.9	25.0	6.6
WMMG912-14	14	24.0	21	25	44.0	33.4	28.4	25.0	6.6
WMMG912-15	15	25.0	-	-	44.0	-	-	25.0	-
WMMG912-16	16	26.5	23	27	44.0	33.4	28.4	25.0	6.6
WMMG912-18	18	29.0	27	33	44.0	37.5	30.0	25.0	7.5
WMMG912-20	20	31.5	29	35	44.0	37.5	30.0	25.0	7.5
WMMG912-22	22	33.0	31	37	44.0	37.5	30.0	25.0	7.5
WMMG912-24	24	37.0	33	39	44.0	42.5	32.5	25.0	7.5
WMMG912-25	25	38.0	34	40	44.0	42.5	32.5	25.0	7.5
WMMG912-28	28	41.0	37	43	60.0	42.5	35.0	33.0	7.5
WMMG912-30	30	43.0	39	45	60.0	42.5	35.0	33.0	7.5
WMMG912-32	32	45.0	42	48	60.0	47.5	35.0	33.0	7.5
WMMG912-33	33	46.0	42	48	60.0	47.5	35.0	33.0	7.5
WMMG912-35	35	48.0	44	50	60.0	47.5	35.0	33.0	7.5
WMMG912-38	38	52.5	49	56	60.0	46.0	36.0	33.0	9.0
WMMG912-40	40	55.5	51	58	60.0	46.0	36.0	33.0	9.0
WMMG912-43	43	58.5	54	61	71.0	51.0	36.0	41.0	9.0
WMMG912-45	45	60.5	56	63	71.0	51.0	36.0	41.0	9.0
WMMG912-48	48	64.0	59	66	71.0	51.0	36.0	41.0	9.0
WMMG912-50	50	66.0	62	70	72.5	50.5	38.0	42.5	9.5
WMMG912-53	53	69.0	65	73	71.0	59.0	36.5	41.0	11.0
WMMG912-55	55	71.0	67	75	71.0	59.0	36.5	41.0	11.0
WMMG912-58	58	76.0	70	78	71.0	59.0	41.5	41.0	11.0
WMMG912-60	60	78.0	72	80	71.0	59.0	41.5	41.0	11.0
WMMG912-63	63	82.0	75	83	-	59.0	41.5	-	11.0
WMMG912-65	65	84.0	77	85	70.0	69.0	41.5	49.0	11.0
WMMG912-68	68	87.0	81	90	70.0	68.7	41.2	49.0	11.3
WMMG912-70	70	89.0	83	92	70.0	68.7	48.7	49.0	11.3
WMMG912-75	75	95.0	88	97	73.0	68.7	48.7	52.0	11.3
WMMG912-80	80	101.5	95	105	79.0	78.0	48.0	56.0	12.0
WMMG912-85	85	-	100	110	79.0	76.0	46.0	56.0	14.0
WMMG912-90	90	111.5	105	115	83.0	76.0	51.0	59.0	14.0
WMMG912-95	95	-	110	120	83.0	76.0	51.0	59.0	14.0
WMMG912-100	100	122.5	115	125	86.0	76.0	51.0	62.0	14.0

Catalog model

WM M3

Pressure: ≤ 1.0 MPa
Speed: ≤ 10 m/s
Temperature: -20 to +180 °C

Faces and elastomers are chosen for the duty.

Model	d (mm)	d4	d7	d2	d3	l1	l2	l3	l4	l5
WMM3-10	10	19	21	20	19.2	10	15.5	7.1		16.9
WMM3-12	12	21	23	22	21.6	10	16	7.6		17.4
WMM3-14	14	23	25	24	24.6	10	16.5	7.6	16.5	17.4
WMM3-16	16	26	27	26	28	10	18	9	16.5	19.5
WMM3-18	18	29	33	31	30	11.5	19.5	10	18	20.5
WMM3-20	20	31	35	34	35	11.5	22	9.5	19	22
WMM3-22	22	33	37	36	35	11.5	21.5	9.5	20.5	23.5
WMM3-24	24	35	39	38	38	11.5	23.5	9.5	22	25
WMM3-25	25	36	40	39	38	11.5	26.5	9.5	23.5	26.5
WMM3-28	28	40	43	42	42	11.5	26.5	11	24.5	26.5
WMM3-30	30	43	45	44	45	11.5	26.5	11	24.5	25
WMM3-32	32	46	48	46	48	11.5	28.5	11	28	28.5
WMM3-33	33	47	48	47		11.5	28.5
WMM3-35	35	49	50	49	52	11.5	28.5	11.5	28	28.5
WMM3-38	38	53	56	54	55	14	33.5	11.5	31	32.2
WMM3-40	40	56	58	56	58	14	36	11.5	34	34.7
WMM3-43	43	59	61	59		14	38.5
WMM3-45	45	61	63	61	64	14	39.5	14.3	36.5	39.2
WMM3-48	48	64	66	64	68.4	14	46	14.3	42	44.7
WMM3-50	50	66	70	66	69.3	15	45	14.3	43	45.7
WMM3-53	53	69	73	69		15	47
WMM3-55	55	71	75	71	75.4	15	49	15.3	47	49
WMM3-58	58	76	78	78	78.4	15	55	15.3	50	52
WMM3-60	60	78	80	79	80.4	15	55	15.3	51	55
WMM3-63	63	83	83	83		15	55
WMM3-65	65	84	85	85	85.4	15	55	15.3	52	54.3
WMM3-68	68	88	90	88	91.5	18	55	16	52.7	55.3
WMM3-70	70	90	92	90	92	18	57	15.3	54	56.3
WMM3-75	75	98	97	98	99	18	62	15.3	54	56.3
WMM3-80	80	100	105	103	104	18.2	61.8	16.3	58	59.3

Catalog model

WM H12N

Pressure: ≤ 1.0 MPa
Speed: ≤ 10 m/s
Temperature: -20 to +180 °C

Rotary ring: Carbon, SiC, tungsten carbide
Stationary ring: Ceramic, SiC, tungsten carbide
Secondary seals: NBR, EPDM, Viton
Spring and metal parts: 304 stainless, 316 stainless

Model	d1 (mm)	d2	d3	d7	l3	l1	l2
WMH12N-10	10	14	24	21	10	25.7	18
WMH12N-12	12	16	26	23	10	26.7	18
WMH12N-14	14	18	31	25	10	29.7	18
WMH12N-16	16	20	34	27	10	31.2	18
WMH12N-18	18	22	36	33	11.5	32.7	20
WMH12N-20	20	24	38	35	11.5	32.7	20
WMH12N-22	22	26	40	37	11.5	32.7	20
WMH12N-24	24	28	42	39	11.5	32.7	20
WMH12N-25	25	30	44	40	11.5	33.7	20
WMH12N-28	28	33	47	43	11.5	35.7	20
WMH12N-30	30	35	49	45	11.5	35.7	20
WMH12N-32	32	38	54	48	11.5	39.7	20
WMH12N-33	33	38	54	48	11.5	39.7	20
WMH12N-35	35	40	56	50	11.5	43.7	20
WMH12N-38	38	43	59	56	14	46.2	23
WMH12N-40	40	45	61	58	14	48.2	23
WMH12N-43	43	48	64	61	14	51.2	23
WMH12N-45	45	50	66	63	14	55.2	23
WMH12N-48	48	53	69	66	14	55.2	23
WMH12N-50	50	55	71	70	15	58.2	25
WMH12N-53	53	58	78	73	15	60.2	25
WMH12N-55	55	60	79	75	15	60.2	25
WMH12N-58	58	63	83	78	15	60.2	25
WMH12N-60	60	65	85	80	15	60.2	25
WMH12N-63	63	68	88	83	15	60.2	25
WMH12N-65	65	70	90	85	15	61.2	25
WMH12N-70	70	75	98	92	18	63.2	28
WMH12N-75	75	80	103	97	18	68.2	28
WMH12N-80	80	85	109	105	18.2	68.2	28

Catalog model

WM HJ92N

Pressure: ≤ 2.5 MPa
Speed: ≤ 20 m/s
Temperature: -20 to +180 °C

Stationary ring: Ceramic, SiC, tungsten carbide
Rotary ring: Carbon, SiC, tungsten carbide
Secondary seals: NBR, EPDM, Viton
Spring and pressed parts: Steel

Model	d (mm)	d3	d6	d7	l8	l1k	l3
WMHJ92N-18	18	32	27	33	15.0	37.5	7
WMHJ92N-20	20	34	29	35	15.0	37.5	7
WMHJ92N-22	22	36	31	37	15.0	37.5	7
WMHJ92N-24	24	38	33	39	15.0	40.0	7
WMHJ92N-25	25	39	34	40	15.0	40.0	7
WMHJ92N-28	28	42	37	43	15.0	42.5	7
WMHJ92N-30	30	44	39	45	15.0	42.5	7
WMHJ92N-32	32	47	42	48	15.0	42.5	7
WMHJ92N-33	33	47	42	48	15.0	42.5	7
WMHJ92N-35	35	49	44	50	15.0	42.5	7
WMHJ92N-38	38	54	49	56	16.0	45.0	8
WMHJ92N-40	40	56	51	58	16.0	45.0	8
WMHJ92N-43	43	59	54	61	16.0	45.0	8
WMHJ92N-45	45	61	56	63	16.0	45.0	8
WMHJ92N-48	48	64	59	66	16.0	45.0	8
WMHJ92N-50	50	66	62	70	17.0	47.5	9.5
WMHJ92N-53	53	69	65	73	17.0	47.5	9.5
WMHJ92N-55	55	71	67	75	17.0	47.5	9.5
WMHJ92N-58	58	78	70	78	18.0	52.5	10.5
WMHJ92N-60	60	80	72	80	18.0	52.5	10.5
WMHJ92N-63	63	83	75	83	18.0	52.5	10.5
WMHJ92N-65	65	85	77	85	18.0	52.5	10.5
WMHJ92N-68	68	88	81	90	18,5	52.5	11.0
WMHJ92N-70	70	90	83	92	19.0	60.0	11.5
WMHJ92N-75	75	99	88	97	19.0	60.0	11.5
WMHJ92N-80	80	104	95	105	19.0	60.0	11.5
WMHJ92N-85	85	109	100	110	19.0	60.0	11.5
WMHJ92N-90	90	114	105	115	20.5	65.0	13.0
WMHJ92N-95	95	119	110	120	20.5	65.0	13.0
WMHJ92N-100	100	124	115	125	20.5	65.0	13.0

Catalog model

WM M7N / M74N

Pressure: ≤ 1.6 MPa
Speed: ≤ 20 m/s
Temperature: -30 to +200 °C

Stationary ring: Ceramic, SiC, tungsten carbide
Rotary ring: Carbon, SiC, tungsten carbide
Secondary seals: NBR, EPDM, Viton
Spring and pressed parts: Steel

Model	d1 (mm)	d3	d6	d7	l1	l3	f
WMM7N-14	14	25.0	21	25.0	35.0	10.0	6.0
WMM7N-16	16	27.0	23	27.0	35.0	10.0	6.0
WMM7N-18	18	33.0	27	33.0	37.0	11.5	7.0
WMM7N-20	20	35.0	29	35.0	37.0	11.5	7.0
WMM7N-22	22	37.0	31	37.0	37.0	11.5	7.0
WMM7N-24	24	39.0	33	39.0	40.0	11.5	8.0
WMM7N-25	25	40.0	34	40.0	40.0	11.5	8.0
WMM7N-28	28	43.0	37	43.0	42.5	11.5	8.0
WMM7N-30	30	45.0	39	45.0	42.5	11.5	8.0
WMM7N-32	32	47.0	42	48.0	42.5	11.5	8.0
WMM7N-33	33	48.0	42	48.0	42.5	11.5	8.0
WMM7N-35	35	50.0	44	50.0	42.5	11.5	8.0
WMM7N-38	38	55.0	49	56.0	45.0	14.0	8.0
WMM7N-40	40	57.0	51	58.0	45.0	14.0	8.0
WMM7N-43	43	60.0	54	61.0	45.0	14.0	8.0
WMM7N-45	45	62.0	56	63.0	45.0	14.0	8.0
WMM7N-48	48	65.0	59	66.0	45.0	14.0	8.0
WMM7N-50	50	67.0	62	70.0	47.5	15.0	8.0
WMM7N-53	53	70.0	65	73.0	47.5	15.0	8.0
WMM7N-55	55	72.0	67	75.0	47.5	15.0	8.0
WMM7N-58	58	79.0	70	78.0	52.5	15.0	9.0
WMM7N-60	60	81.0	72	80.0	52.5	15.0	9.0
WMM7N-63	63	84.0	75	83.0	52.5	15.0	9.0
WMM7N-65	65	86.0	77	85.0	52.5	15.0	9.0
WMM7N-68	68	89.0	81	90.0	52.5	18.0	9.0
WMM7N-70	70	91.0	83	92.0	60.0	18.0	9.0
WMM7N-75	75	99.0	85	97.0	60.0	18.0	10.0
WMM7N-80	80	104.0	95	105.0	60.0	18.2	10.0
WMM7N-85	85	109.0	100	110.0	60.0	18.2	10.0
WMM7N-90	90	114.0	105	115.0	65.0	18.2	10.0
WMM7N-95	95	119.0	110	120.0	65.0	17.2	10.0
WMM7N-100	100	124.0	115	125.0	65.0	17.2	10.0

Catalog model

WM H7N / H75N

Pressure: ≤ 2.5 MPa
Speed: ≤ 20 m/s
Temperature: -20 to +200 °C

Rotary ring: Carbon, SiC, tungsten carbide
Stationary ring: Ceramic, SiC, tungsten carbide
Secondary seals: NBR, EPDM, Viton
Spring and metal parts: 304 stainless, 316 stainless

Model	d1 (mm)	d2	d3	d6	d7	l2	l1
WMH7N-25	25	30	45	34	40	36.0	47.5
WMH7N-28	28	33	48	37	43	38.5	50.0
WMH7N-30	30	35	50	39	45	38.5	50.0
WMH7N-33	33	38	55	42	48	38.5	50.0
WMH7N-35	35	40	57	44	50	38.5	50.0
WMH7N-38	38	43	60	49	56	38.5	52.5
WMH7N-40	40	45	62	51	58	38.5	52.5
WMH7N-43	43	48	65	54	61	38.5	52.5
WMH7N-45	45	50	67	56	63	38.5	52.5
WMH7N-48	48	53	70	59	66	38.5	52.5
WMH7N-50	50	55	72	62	70	42.5	57.5
WMH7N-53	53	58	79	65	73	42.5	57.5
WMH7N-55	55	60	81	67	75	42.5	57.5
WMH7N-60	60	65	86	72	80	47.5	62.5
WMH7N-65	65	70	91	77	85	47.5	62.5
WMH7N-70	70	75	99	83	92	52	70.0
WMH7N-75	75	80	104	88	97	52	70.0
WMH7N-80	80	85	109	95	105	51.8	70.0
WMH7N-85	85	90	114	100	110	56.8	75.0
WMH7N-90	90	95	119	105	115	56.8	75.0
WMH7N-95	95	100	124	110	120	57.8	75.0

Catalog model

WM M74D

Pressure: ≤ 2.5 MPa
Speed: ≤ 20 m/s
Temperature: -20 to +200 °C

Rotary ring: Carbon, SiC, tungsten carbide
Stationary ring: Ceramic, SiC, tungsten carbide
Secondary seals: NBR, EPDM, Viton
Spring and metal parts: 304 stainless, 316 stainless

Model	d1 (mm)	d2	d7	d3	l3	l1
WMM74D-14	14	25	25	33	10	25.2
WMM74D-16	16	27	27	35	10	25.2
WMM74D-18	18	33	33	37	11.5	26.2
WMM74D-20	20	35	35	39	11.5	26.2
WMM74D-22	22	37	37	41	11.5	26.2
WMM74D-24	24	39	39	43	11.5	28.7
WMM74D-25	25	40	40	44	11.5	28.7
WMM74D-28	28	43	43	46	11.5	31.2
WMM74D-30	30	45	45	48	11.5	31.2
WMM74D-32	32	47	48	50	11.5	31.2
WMM74D-33	33	48	48	50	11.5	31.2
WMM74D-35	35	50	50	53	11.5	31.2
WMM74D-38	38	55	50	60	14	31.2
WMM74D-40	40	57	53	64	14	31.2
WMM74D-43	43	60	58	65	14	31.2
WMM74D-45	45	62	60	68	14	31.2
WMM74D-48	48	65	66	68	14	31.2
WMM74D-50	50	67	70	70	15	32.7
WMM74D-53	53	70	73	74	15	32.7
WMM74D-55	55	72	75	75	15	32.7
WMM74D-58	58	79	78	82	15	32.7
WMM74D-60	60	81	80	84	15	32.7
WMM74D-63	63	84	83	87	15	32.7
WMM74D-65	65	86	85	94	15	32.7
WMM74D-68	68	89	90	92	18	34.7
WMM74D-70	70	91	92	94	18	42.2
WMM74D-75	75	99	97	104	18	42.2
WMM74D-80	80	104	105	108	18.2	42
WMM74D-85	85	109	110	113	18.2	42
WMM74D-90	90	114	115	118	18.2	47
WMM74D-95	95	119	120	123	17.2	48
WMM74D-100	100	124	125	128	17.2	48

FAQ

Burgmann-Compatible Seal FAQ

Are these genuine Burgmann seals?

No — they are OEM-compatible equivalents built to Burgmann and EagleBurgmann dimensions. They are not sold as genuine Burgmann parts.

My Burgmann seal is not on this page. Can you make it?

Most likely. The models here are examples. Send the seal part number, a drawing or the old seal and we confirm the fit before quoting.

Can you work from the pump model?

Not on its own. We build from the seal itself: its part number, its drawing or a sample of the old seal.

Can you match obsolete Burgmann seals?

Yes — we machine discontinued patterns from a sample or drawing.

Source Burgmann-Compatible Seals

OEM-compatible and custom-machined Burgmann equivalents built in-house to your spec, at low minimums. Send a part number, a drawing or a sample and we’ll quote.

Request a quote →All seal types