Cowseal

MG scaled 1

Burgmann MG1 MG12 MG13 MGS20

The Burgmann MG1, MG12 and MG13 are robust, high-quality elastomer bellows mechanical seals designed for a wide range of industrial applications.

These unbalanced single seals feature a rotating bellows design that is independent of the direction of rotation. The special bellows design protects the seal faces during installation and provides a large axial movement capability to accommodate shaft deflections.

Contact us
Download Catalog

Mechancial seal drawing

628721E1 1E5B 4fac 88DA 7C59523B1B33

Mechancial seal Chart

d1 d3 d7 d8 d7-1 l3 l2 l1 l4 l5 l6 l7 l8
10 22 21 19.2 24.6 6.5 6.5 9 10 14.7 25.5 26 33.5
12 24.5 23 21.6 27.8 6.5 6.5 9 10 14.7 25.5 26 33.5
14 24.5 23 21.6 27.8 6.5 6.5 9 10 14.7 25.5 28.5 33.5
16 28 27 24.6 30.9 6.5 6.5 10.5 10 17.2 25.5 28.5 33.5
18 28 27 24.6 30.9 7.5 7.5 10.5 10 17.2 25.5 30.1 37.7
20 31.5 30 34.15 34.15 7.5 7.5 10.5 11.4 21.7 25.5 30.1 37.7
22 31.5 30 34.15 34.15 7.5 7.5 10.5 11.4 21.7 25.5 32.7 42.7
24 34.5 33 40.5 40.5 7.5 7.5 10.5 11.4 21.7 25.5 32.7 42.7
26 34.5 33 40.5 40.5 7.5 7.5 10.5 11.4 21.7 25.5 32.7 42.7
28 37.5 36 46.5 46.5 7.5 7.5 10.5 11.4 21.7 25.5 35.2 42.7
30 37.5 36 46.5 46.5 7.5 7.5 10.5 11.4 21.7 25.5 35.2 42.7
32 40.5 39 48.4 48.4 7.5 7.5 10.5 11.4 21.7 25.5 35.2 42.7
35 40.5 39 48.4 48.4 7.5 7.5 10.5 11.4 21.7 25.5 35.2 42.7
38 43.5 42 50.8 50.8 7.5 7.5 10.5 11.4 21.7 25.5 35.2 47.7
40 43.5 42 50.8 50.8 9 9 10.8 12 14 30.2 33.5 36.2
42 43.5 42 50.8 50.8 9 9 10.8 12 14 30.2 41.5 36.2
45 48.5 48 55.3 55.3 9 9 10.8 12 14 30.2 41.5 36.2
48 48.5 48 55.3 55.3 9 9 10.8 12 14 30.2 41.5 36.2
50 51.5 50 57.15 57.15 9 9 10.8 12 14 30.2 41.5 36.2
53 51.5 50 57.15 57.15 9 9 10.8 12 14 30.2 41.5 36.2
55 54.5 54 61.5 61.5 9 9 10.8 12 14 30.2 41.5 36.2
58 54.5 54 61.5 61.5 9 9 10.8 12 14 30.2 41.5 36.2
60 57.5 57 63.8 63.8 9 9 10.8 12 14 30.2 41.5 36.2
63 57.5 57 63.8 63.8 9 9 10.8 12 14 30.2 41.5 36.2
65 60.5 60 66.7 66.7 9.5 9.5 11.5 13.5 14 30.7 41.5 38.2
68 60.5 60 66.7 66.7 9.5 9.5 11.5 13.5 14 30.7 41.5 38.2
70 63.5 63 69.85 69.85 9.5 9.5 11.5 13.5 14 30.7 41.5 38.2
75 63.5 63 69.85 69.85 9.5 9.5 11.5 13.5 14 30.7 41.5 38.2
80 66.5 66 72.3 72.3 9.5 9.5 11.5 13.5 15 32.2 41.5 41.7
85 66.5 66 72.3 72.3 11 11 13.5 13.5 15 32.2 41.5 41.7
90 69.5 69 75.4 75.4 11 11 13.5 13.5 15 32.2 41.5 41.7
95 69.5 69 75.4 75.4 11 11 13.5 13.5 15 32.2 41.5 41.7
100 72.5 72 78.4 78.4 11 11 13.5 13.5 15 32.2 41.5 41.7

Key features

  • Elastomer bellows rotating design
  • Unbalanced single seal, independent of rotation direction
  • No torsion transmitted to bellows
  • Shaft is protected over entire seal length
  • Special bellows design protects seal faces during installation
  • Large axial movement capability to handle shaft deflections
  • Suitable for sterile applications and hot water pumps (MG12)

Materials of construction

  • Rotary Face: Carbon, Silicon Carbide, Tungsten Carbide
  • Stationary Seat: Ceramic, Silicon Carbide, Tungsten Carbide
  • Elastomers: Nitrile, EPDM, FKM, FFKM
  • Metal Parts: Stainless Steel

Operating limits

  • Temperature: -20°C to 120°C (-4°F to 248°F)
  • Pressure: Vacuum to 1.2 MPa (174 psi)
  • Speed: ≤10 m/s (32.8 ft/s)

Applications

  • Chemical processing
  • Pulp & paper
  • Water & wastewater treatment
  • Food & beverage
  • Pharmaceutical
  • General industrial pumps, mixers, agitators

Interchangeability

  • MG1 interchangeable with Vulcan 20/10, 20H, 22
  • MG12 interchangeable with Burgmann RMG12
  • MG13 interchangeable with Burgmann H10

FAQs

MG1 and MG13 are essentially the same seal, while the MG12 is a variant of the MG1 with a longer bellows tail to meet the EN 12756 standard fitting length.

See The relevent products From Cowseal

Ready to get your
mechanical seal solutions?

Contact us
mechanical seal solutions for water pumps and centrifugal pump
We’ll listen to your needs, identify the best approach, and then create a better mechanical pump seal solution that’s right for you.

Cowseal

+86 18858072182​

Hello@cowseal.com​

Linkedin

chehe industial park, ningbo, china